Filtersource.com, inc. offers a variety of Filtration equipment for the Waste Veggie Oil application for low flow application (1-2 GPM) using the PBH series plastic housings as well as larger non-metallic vessels and even multi round metal vessels for very large flow applications.
For the Biofuel Producers Filtersource has access to a variety of technologies (Not all shown on this site) which can address a variety of different filtration processes.
such as:
►Filtration of feedstock such as cold pressed seed oils for pure vegetable oil.
►Filtration of clay, carbon and silica absorbents from refined oil.
►Removal of Haze and sterols from methyl ester (Biodiesel)
►Filtration of glycerin to remove solids or activated carbon.
Involves the removal of spoilage organisms and the reduction of haze, turbidity, and
particulate contamination. Filtration steps here typically employ micro-fi ber pre-fi lters, depth or pleated cartridges and lenticular modules.
Wine Filtration - Sterilization
Filters to remove all remaining microbial contaminants
through the use of absolute rated, integrity tested pleated membrane filters.
This step is also referred to as final filtration and occurs just before the bottling process.
Filtration and Purification Solutions for the Microelectronics Industry.
We supply Filtration for the manufacture of Semiconductors and Microelectronic devices. Below is just a small list of the applications we provide filters solutions for:
Focusing on your needs:
CMP Filters
High Purity DI Water Filters
Gas Filtration
Sanitary Housings
The Steris System 1 Processor sterilizes and lengthens the life of extremely fragile surgical instruments used in hospitals throughout the world. To improve the quality of the feedwater coming into the machine, Steris Corporation recommends installing 2 to 3 prefilters (PreFilter A, B & Advanced Melt-Blown Upstream Filter) in front of the machine.
Our Elements offer excellent protection for the Steris Final Filter for the A & B Filters!
• Replacement 'A & B' Filters are designed to effectively
protect and extend the life of the final
sterile filter
• Choice of endcap styles to fit your housings
• Meets FDA Standards – All material used in the
construction of the filters meets FDA (Food and
Drug Administration) Title 21 of the CFR
• Clean manufacturing process is used which eliminates
the use of glues or epoxies
• End caps are thermo-bonded to the media and
support hardware
• High dirt holding capacity
• Longer on-line service reduces valuable maintenance
time
• Fixed pore construction eliminates dirt unloading
or fiber releasing
Typical BioFuel Process Schematic
