 |
WVO - Larger Capacity Polypro Bag Housings
Bag Filter Housings with No metal components to rust or corrode. Available in Size #1 and #2, with 2" NPT Connections, All Polypropylene plastic construction.Rated for 150 PSI at 70F.
The Size #1 (FLT4201) is recommended for flow rates of 1-30 GPM in WVO applications.
The Size #2 (FLT4202) is recommended for flow rates of 1-60 GPM in WVO applications.
Note: The Size #2 vessels also offer 2x the dirt holding capacity vs a size #1, so often customers will choose the #2 vessels for longer bag filter life since the cost is not much more than a #1.
|
| Click Here to Order |
 |
WVO - Polyester Felt Filter Bags
Polyester Felt Filter bags for Size #1 (FLT4201) and Size #2 (FLT4202) Bag Vessels. Listed are a few of the common micron sizes, however other micron sizes are available from 0.5 to 200 microns. These Bag filters have a unique Positive Plastic Collar that fits well in the Non Metallic Polyline Housings. This insures a positive no by-pass seal and easy removal with built-in handles.
Packaged: 50 Per Case
|
| Click Here to Order |
 |
WVO - Nylon Mesh Filter Bags
Multifilament Nylon mesh filter bags are ideal for removal of large contaminant particles. Available in Micron sizes from 100um - 800um. These bags are also fitted with a Polypropylene Plastic Collar which is ideal for the FLT series Plastic housings or standard size #1 or #2 Metal Housings.
Packaged: 50 per case
|
| Click Here to Order |
 |
WVO - Low Flow Plastic Housings
PBH Series bag vessel assemblies are made of lightweight corrosion resistant polypropylene.
Available in 10" and 20: housings
1" NPT connections
Complete with gauge, wrench and 3/8" drain valve
|
| Click Here to Order |
 |
WVO - PBH Series Bag Elements
Polypropylene Felt Filter bags to fit the PBH Series 410 and 420 Low Flow Plastic Housings.
Packaged: 20 per Case
|
| Click Here to Order |
Typical BioFuel Process Schematic
PDF Spec sheet