You are at Categories > Shop by Industry > Steris Medical Filters
| The Steris System 1 Processor
|
The Steris System 1 Processor sterilizes and lengthens the life of extremely fragile surgical instruments used in hospitals throughout the world. To improve the quality of the feedwater coming into the machine, Steris Corporation recommends installing 2 to 3 prefilters (PreFilter A, B & Advanced Melt-Blown Upstream Filter) in front of the machine.
Our Elements offer excellent protection for the Steris Final Filter for the A & B Filters!
• Replacement 'A & B' Filters are designed to effectively
protect and extend the life of the final
sterile filter
• Choice of endcap styles to fit your housings
• Meets FDA Standards – All material used in the
construction of the filters meets FDA (Food and
Drug Administration) Title 21 of the CFR
• Clean manufacturing process is used which eliminates
the use of glues or epoxies
• End caps are thermo-bonded to the media and
support hardware
• High dirt holding capacity
• Longer on-line service reduces valuable maintenance
time
• Fixed pore construction eliminates dirt unloading
or fiber releasing |
|
 |
A - Filter for Steris System 1
► FPLGT00100 Double open end with silicone flat gasket seal.
► F80103000 Single open end with internal 214 silicone O-ring.
Recessed cup on closed end to fit over
housing post.
|
| Click Here to Order |
|
B - Filter for Steris System 1
► FPLGT00200 Single open end with 2-222 Silicone O-Rings
Flat cap on closed end.
► F80D000013 Single open end with 2-222 EPR O-Rings.
Recessed cup on closed end to fit over
housing post.
|
| Click Here to Order |
|
PDF Spec Sheet