Features & Benefits of XE Filter Pads:

All XE filter sheets comprise of a blend of selected, processed & bleached cellulose fibers combined with non hazardous filter aids & approved resins to produce filter media with superior filtration capabilities in conjunction with excellent wet & dry handling characteristics.

The pore size distribution of the sheet is carefully controlled so that there is an even build up of the filter cake on the sheet.

This ensures that filter capacity is maximized and that there is minimum risk of leakage.

All XE grades are made to the same carefully controlled thickness specification so that different grades can be used in the same filter press configuration & seal thickness.

Edge leakage is reduced to a minimum because of the special XE filter sheet formulation & processing conditions.

Instructions for correct use: - When inserting into the filter press, handle the filter sheets with care to eliminate distortion or abrasion. Never use a damaged filter sheet. Place the smooth side of the filter sheet against the filtrate plate (i.e. downstream). The rough side faces the liquid to be filtered (i.e. upstream).

Filter Preparation: - Prior to first filtration it is recommended where possible to pre-rinse the closed filters with approx 50 liters of water per sq. meter. During pre-rinsing check for leakage, re-tighten to eliminate if necessary.

Sterilization: - The XE range of sheets may be sterilized with saturated steam or hot water for a period of 20 minutes. The pressed filter pack has to be loosened slightly to ensure that the steam entirely sterilizes the system. Final pressure should only be applied to the filter package once the entire filter has cooled down.

XE200H-40

Product information

Specifications